Grooved Sediment Water Filter Cartridge by Ronaqua

From the brand PURE WATER IN EVERY DROP! Visit the Store For more info visit our store Visit the Store For more info visit our store Visit the Store Previous page Next page Product Description

Melt-blown Four Layers Filtration Polypropylene Grooved Sediment Filter (40 pack)

A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters.

This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time.

These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water.

The main difference between a Grooved Sediment Filter and a regular Sediment Filter is the surface area; the Grooved Sediment has a larger surface area, which contributes to a longer life span of the filter and thus better filtration.

Multi-layer Gradient Filtration Outer Zone Mid Zone Inner Zone Innermost Zone

These Sediment Water Filters Intercept all Following Impurities: Rust & Corrosion, Coarse Sand, Hard Scale, Fine Sand, Particles, Sediment, Dirt, Silt

These universal sediment filters are 2.5 x 10-inch. Fit most standard under-sink Reverse Osmosis water filtration units or any type of water filtration units with standard 10-inch housing.

Reverse Osmosis System Sediment water filter cartridge usually used as first stage in Reverse Osmosis System

Whole House Water System Sediment water filter cartridge usually used as a pre-filter in the Whole House Water System to optimize performers and life span of the carbon or GAC filters.

Under Counter-top Water Filter System Sediment water filter cartridge usually used as a pre-filter in the Under Counter-top Water Filter System to optimize performers and life span of the carbon or GAC filters.

Counter-top Water Filter System Sediment water filter cartridge usually used as a pre-filter in the Counter-top Water Filter System to optimize performers and life span of the carbon or GAC filters.

Extraordinary Dirt-Holding Capacity Superior contaminant holding capacity and superior flow rate compared to similar size sediment water filter cartridges. These cartridges will reduce sediment particles as small as 1 microns without adding taste, odor, or color to your water. Such filter cartridges are ideal for all residential, rural, commercial, industrial, and municipal applications.

Specifications Filter Type: Fine Melted Polypropylene Height IN/CM: 10 IN/24.4 CM Outer Diameter IN/CM: 2.5 IN/6.35 CM Inner Diameter IN/CM: 1.125 IN/2.5 CM Micron Rating: 1 MICRON Flow Rate: 5 GPM Operating Temperature: 40°F (4.4°C) - 125°F (51.7°C) Operating Pressure: 20 PSI (1.4 bar) - 125 PSI (8.6 bar) Product Lifetime: Replace two or three times a year - depending on your water quality Packaging: This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations.

Taste the difference yourself💎 Industry Standard 10-inch 1 Micron Sediment Filter - Used for effectively removing most sediments, cysts, chlorine, and fluorides. The grooved surface area allows greater dirt holding capacity and a longer lifespan. 💎 This filter is ideal for a standard Reverse Osmosis Water Filtration Unit or any type of Water Filtration Unit with a 10 inch housing and WELL-MATCHED Models of Cartridges: Dupont PFC5002,DuPont WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Culligan P5, P5-D, P5A, OmniFilter RS14, RS14-SD, RS14-DS and RS14-SS, GE FXUSC, Aquaboon 25S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05 💎 Product Lifespan: Replace two or three times a year - depending on your water quality 💎 This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations. Dimensions: 10 inches x 2.5 inches (24.4 cm x 6.35 cm) 💎 WELL-FIT FOLLOWING HOUSINGS AND REVERS OSMOSIS WATER FILTER SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, EcoPure EPW2; iSpring RCC7AK, Global Water RO-505, RO5DX, APEC ROES-50-A, SimPure RPWROKSN075HDB

product information: