Compact Sediment Water Filter Cartridge for RO and Whole House Systems, 6-Pack

PURE WATER IN EVERY DROP! - The Brand You Can Trust

Visit the Store: For more information, please visit our store.

Product Description: Melt-blown Four Layers Filtration Polypropylene Sediment Filter (6 pack)

A Sediment Water Filter effectively removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water can pass, but the unwanted particles are not able to. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, with the smaller the micron measurement, the smaller the holes in the filter, allowing it to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters.

This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net, catching unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time.

The particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. These Sediment Water Filters intercept all the following impurities: Rust & Corrosion, Coarse Sand, Hard Scale, Fine Sand, Particles, Sediment, and Dirt.

These universal sediment filters are 2.5 x 10-inch and fit most standard under-sink Reverse Osmosis water filtration units or any type of water filtration units with standard 10-inch housing. They are also suitable for Whole House Water Systems, Under Counter-top Water Filter Systems, and Counter-top Water Filter Systems, where they are typically used as a pre-filter to optimize the performance and lifespan of the carbon or GAC filters.

Specifications: - Filter Type: Fine Melted Polypropylene - Height: 10 IN/24.4 CM - Outer Diameter: 2.5 IN/6.35 CM - Inner Diameter: 1.125 IN/2.5 CM - Micron Rating: 50 MICRON - Flow Rate: 5 GPM - Operating Temperature: 40°F (4.4°C) - 125°F (51.7°C) - Operating Pressure: 20 PSI (1.4 bar) - 125 PSI (8.6 bar) - Product Lifetime: Replace two or three times a year, depending on water quality - Packaging: Wrapped and sealed, meeting NSF (National Science Foundation) standards

Taste the difference yourself with our industry-standard 10-inch 50 Micron Sediment Filter, designed to effectively remove sediments, cysts, chlorine, and fluorides. This filter is well-matched with a variety of Reverse Osmosis and Water Filtration Units, ensuring a perfect fit and optimal performance. Experience the pure water difference with our brand, PURE WATER IN EVERY DROP!

product information: